Pitt | Swanson Engineering

The Department of Mechanical Engineering and Materials Science (MEMS) is the largest in the Swanson School of Engineering in terms of students and faculty. All of our programs are ABET-accredited. The Department's core strengths include:

  • Advanced Manufacturing and Design
  • Materials for Extreme Conditions
  • Soft Matter Biomechanics
  • Computational and Data-Enabled Engineering
  • Cyber-Physical Systems and Security
  • Nuclear and other Sustainable Energies
  • Quantitative and In Situ Materials Characterization

久9视频这里只有精品_自拍亚洲_俺去啦线视频在线观看MEMS faculty are not only world-renowned academicians, but accessible teachers who seek to inspire and encourage their students to succeed.  

久9视频这里只有精品_自拍亚洲_俺去啦线视频在线观看The Department also has access to more than 20 laboratory facilities that enhance the learning process through first-rate technology and hands-on experience.

久9视频这里只有精品_自拍亚洲_俺去啦线视频在线观看Each year, the Department graduates approximately 90 mechanical and materials science engineers, with nearly 100% placed in excellent careers with industry and research facilities around the globe.


Learn more about Pitt's planning and response to COVID-19

Bioengineering, Chemical & Petroleum, Civil & Environmental, Electrical & Computer, Industrial, MEMS, Diversity, Student Profiles, Office of Development & Alumni Affairs

Please visit and bookmark the University of Pittsburgh COVID-19 site for the most up-to-date information and a full list of resources. From the University Times: As the coronavirus COVID-19 continues to spread around the world, Pitt is remaining diligent with addressing related issues as the pop up. For an overall look at updates from Pitt, go to emergency.coralskeppelbaypreview.com. On Saturday, Provost Ann Cudd issued a statement about how to support faculty and staff who have committed to attending professional conferences this semester and choose not to attend due to the COVID-19 outbreak. The University will grant an exception for travel booked through May 31 and reimburse any out-of-pocket expenses incurred by those who decide to cancel travel. The administration will reassess this deadline date as COVID-19 evolves and may extend the deadline as conditions evolve. For more updates from the provost, go to provost.coralskeppelbaypreview.com. The provost and the University Center for Teaching and Learning is encouraging faculty to be prepared if remote learning situations become required. The center has set up a page detailing the basics of providing instructional continuity. The page will be updated regularly. Find information about remote learning and more at teaching.coralskeppelbaypreview.com/instructional-continuity. All business units and responsibilities centers also are being asked to work on how to handle mass absenteeism and/or the need for as many people as possible to work at home.


Rumcik Scholarship Dinner Held


A celebration dinner was recently held to honor the 2019 recipients of The Robert E. Rumcik ’68 Scholarship in Mechanical and Materials Engineering. From left, those present were; Dr. Brendan Connolly (Operations Engineer, Ellwood Quality Steels and former Rumcik Scholar), Jonah De Cortie (MSE junior, scholar recipient), Mike Morgus (President, Ellwood Quality Steels), Alexandra Beebout (MSE senior, scholar recipient), Bob Rumcik (retired President of Ellwood Quality Steels), and Dr. Brian Gleeson (MEMS Department Chair). Beebout has accepted a position at Ellwood and will begin working full-time upon graduating this spring.


Stellar Student Researchers

Chemical & Petroleum, MEMS, Student Profiles

PITTSBURGH (Jan. 30, 2020) — Most researchers can take certain things, like gravity, for granted. That is not the case for the two groups of students from the University of Pittsburgh who will be sending their experiments to fly aboard the International Space Station (ISS). Thanks to a Pitt SEED Grant, two groups of students from the Swanson School of Engineering and the School of Pharmacy have the opportunity to send experiments into space to study the effects of microgravity on their subjects through Pitt’s participation in the Student Spaceflight Experiments Program (SSEP). “This is an incredible opportunity for our students to participate in one of humankind’s most impressive ventures: spaceflight,” says David Vorp, PhD, associate dean for research, John A. Swanson Professor of Bioengineering at the Swanson School of Engineering, and co-principle investigator of the SSEP at Pitt. “We’re impressed that our interdisciplinary student teams designed not one, but two experiments accepted to this highly selective program.” Vorp is joined as co-principle investigator by Ravi Patel, PharmD, and Kerry Empey, PharmD, PhD, from the School of Pharmacy. John Donehoo, RPh, clinical pharmacist at UPMC, joins the project as a select collaborator. The SSEP student teams are given a 10-inch silicone tube in which to perform their experiments, which they can segment with clamps to keep elements of the experiment separate until they reach the ISS. Scientists aboard the ISS can only be given simple instructions, like removing the clamps and shaking the tube, making experiment design complicated. Finding a Silver Lining One interdisciplinary group of students is studying how silver nanoparticles effect the immune response of Daphnia Magna, a species of water flea that can show an immune response. Researchers Samantha Bailey, PharmD candidate; Jordan Butko, sophomore studying mechanical engineering; Amanda Carbone, junior studying chemical engineering; and Prerna Dodeja, MS student in the School of Pharmacy, will look at genetic markers in the organism that indicate its immune response once it returns to earth. “Researchers have previously tested immune response in Daphnia Magna, but no one has looked at it with regard to nanoparticles yet,” says Carbone. “We’re excited that we get to build on the work that others have done and explore new territory.” Silver nanoparticles are also sometimes found in antibacterial products and have been associated with significant toxicity in the liver and brain. While these nanoparticles aren’t so problematic on Earth, where gravity keeps them down, they could be more harmful in microgravity, where they can be accidentally inhaled or ingested. The study will investigate the effect of these silver nanoparticles on Daphnia Magna’s immune system in microgravity, comparing it to Daphnia Magna’s response on Earth, to shed light on if and how astronauts’ immune systems function differently in space. Aerospace Aluminum Marissa Defallo, a junior studying mechanical engineering, and Nikolas Vostal, a junior studying materials science, make up the second group of student researchers. They will send a sample of 3D-printed aluminum with unique topography, combined with an oxidizer like a saltwater solution, to the ISS to study corrosion in microgravity. Aluminum is frequently used in the aerospace industry, including on the ISS, and the experiment will provide insights into how the material corrodes in space, information that could inform future corrosion-resistant materials. “At my co-op with American Airlines, we had to do corrosion training, and that evolved into the idea for this project. When satellites are in orbit, they are still in Earth’s atmosphere, and there’s oxygen present to cause corrosion,” says Defallo.  “I’ve always had a passion for space and want to work for a company like SpaceX someday, so this kind of experience is an invaluable opportunity to have.” Though the launch date is not yet officially scheduled, the SSEP teams say they may be able to send the experiments into space in June 2020.
Maggie Pavlick

The Difference the Right Tools Can Make


PITTSBURGH (Jan. 16, 2019) —  Sometimes, in order to understand the big picture, you need to start by assessing the smallest of details. It’s a truth that engineers know well — selecting the right materials can mean the success or failure of a given application. As technology advances, researchers have assessed engineering materials at the microscopic level for applications ranging from nanomachines to semiconductors, specialized coatings to robotics. For researchers at the University of Pittsburgh’s Swanson School of Engineering, looking closely enough to engineer materials for cutting-edge applications would not have been possible without the generous $1 million gift that Thomas F. Dudash provided in 2018. Mr. Dudash, an alumnus of the University of Pittsburgh who received his bachelor’s degree in metallurgical engineering in 1960, never imagined that he’d have a million dollars to donate for advanced research. After a lifelong career with Allegheny Ludlum, he wanted to share his success with the next generation of materials engineers. The gift was designated for the Department of Mechanical Engineering and Materials Science (MEMS), the successor to the metallurgical engineering program. The gift enabled the Department to purchase nano-manipulators, specialized sample holders that allow researchers to make in situ observations of materials behavior at the nano-scale using transmission electron microscopy. In-situ atomistic observation of a gold nano-crystal from Mao's research. Those observations have led to foundational discoveries that are crucial for materials development. Scott X. Mao, MEMS professor, uses a specially designed sample holder to study how metals elongate and deform at the atomic level. Microelectronic mechanical systems rely on components made from microscopic structures of these metals, but metals behave differently at such a reduced length scale. Understanding the mechanical behavior of nanostructured metallic materials will enable the further development of strong and reliable components for advanced nanomechanical devices. Without such holder, it’s impossible to carry out an atomic scaled mechanical and electrical experiments under the most advanced high resolution electron microscope to achieve the understanding. Electron microscopy is used to observe and test individual nanoparticles on flat surface in Jacobs' research. Tevis Jacobs, assistant professor in MEMS, was able to acquire a specialized holder, which enables research advancing the understanding of micro- and nano-surfaces and engineering more stable nanoparticles. Nanoparticles play an important role in advanced industries and technologies, from electronics and pharmaceuticals to catalysts and sensors. Because they can be as small as 10 atoms in diameter, they are susceptible to coarsening with continued use, reducing their functionality and degrading performance. Jacobs received a $500,000 National Science Foundation CAREER Award for this work that will utilize the specialized holder to directly study and measure adhesion properties of nanoparticles and their supporting substrates. Thanks to Mr. Dudash’s gift, Jacobs and his team were able to procure the only commercially-available tool that can manipulate the materials as precisely as is necessary to perform their impactful research. Polymer with embedded copper molecules. The gift also enabled Assistant Professor Markus Chmielus’s research analyzing 3D-printed denture frames. His group has used a SkyScan 1272 micro-computed tomography (microCT) scanner – purchased and maintained using gift funds - to export an accurate model of an existing denture, then used binder jet 3D-printing to reproduce the model. The scanner can analyze samples prior to 3D-printing as well to look for porosity and how that porosity changes when heat treatment is added, helping researchers develop a processing step to eliminate porosity. So far, the group has used the microCT to evaluate densities of green and sintered binder jet 3D-printed metals, including nickel-based superalloys , functional magnetic materials, and a commonly used titanium alloy, Ti-6Al-4V. Image from Roberts' paper in ATVB, "Calcification in Human Intracranial Aneurysms Is Highly Prevalent and Displays Both Atherosclerotic and Nonatherosclerotic Types." Anne Robertson, MEMS and BioE professor, and her team use the micro-CT in their NIH-supported work studying the causes for rupture of intracranial aneurysms (IAs). Robertson and her team used the specialized micro-CT equipment to analyze aneurysm tissue from patients and found that calcification is substantially more prevalent than previously thought. The micro-CT was able to identify microcalcifications as small as 3 micrometers. The team discovered differences in the types of calcification in ruptured versus unruptured aneurysms, made possible using the micro-CT system. The work was published in the journal Arteriosclerosis, Thrombosis, and Vascular Biology (ATVB (doi:10.1161/ATVBAHA.119.312922). This improved understanding could lead to new therapeutic targets and, ultimately, improved outcomes for patients with aneurysms. Great innovations require the right tools. Thanks to Mr. Dudash’s gift, the MEMS Department has the tools to innovate, discover and create—tools that have produced an important base of knowledge that manufacturers will be building on for years to come. “It is generous gifts from donors like Mr. Dudash that enable advanced research and, ultimately, discovery,” said Brian Gleeson, Tack Chaired Professor and MEMS Department Chairman. “Moreover, the funds provided by Mr. Dudash are being used strategically to create specialized capabilities that greatly help to procure further funding from agencies and, hence, further bolster research activities.”
Maggie Pavlick

MEMS Welcomes Two New Faculty Members


Qihan Liu Qihan Liu Dr. Liu received his BS from the University of Science and Technology of China (Special Class for Gifted Young) in 2010 and his PhD from Harvard University in Materials Sciences and Mechanical Engineering in 2016. Since completing his PhD, Dr. Liu has worked at Harvard as a postdoctoral fellow in the Bioengineering Department studying the manufacturing of 3D nanofibrous scaffold for regenerative heart valves. Trained as a theorist during his PhD studies, Dr. Liu has developed a strong background in the mechanics and physics of soft materials, with expertise spanning elastic instability, fracture, rheology, interfacial phenomena, and multi-physics constitutive models. Paul Ohodnicki Paul Ohodnicki Dr. Ohodnicki received bachelor degrees in both Economics and Engineering Physics from the University of Pittsburgh. He earned his MS and Ph.D. degrees in Materials Science from Carnegie Mellon University in 2006 and 2008, respectively. Dr. Ohodnicki’s most recent position was Materials Scientist and Technical Portfolio Lead of the Functional Materials Team at the National Energy Technology Laboratory (NETL) in Pittsburgh. While at NETL, Dr. Ohodnicki received a Presidential Early Career Award in Science and Engineering (2016) and was a finalist for the Service to America Promising Innovations Medal (2017). His research experience has spanned academia, industry, and the federal government. The main focus of Dr. Ohodnicki’s research is the synthesis, characterization, and integration of functional materials down to the nano-scale, together with component-level performance improvements through advanced materials engineering strategies. He has exploited advanced processing methods for both thin film and bulk nano-structured materials and nano-composites. These methods include additive manufacturing, thin film deposition, nanofabrication, and far-from equilibrium processing such as rapid solidification in addition to anisotropic processing in the presence of applied strain and magnetic fields. His research has been particularly impactful in the areas of soft magnetic materials and sensors for harsh service environments.

Mechanical Engineering program
Materials Science program
Engineering Science program
Department News
Nuclear Engineering Program
Graduate Seminars

Upcoming Events

view more